Spool ramp
by swosho, published
0
Share
1429
160
Report Thing as Inappropriate
Description
A while ago we made the Makerbot Deluxe Filament Spindle MK1 ( thingiverse.com/thing:3116 ), and noticed immediately that the full filament roll would drop down over the sides, and either jam the spool, or loop around the shaft under the spool making it hard to feed.
A quick trip to the cad machine and 4 prints later, and all the filament stays where it is supposed to be. We haven't looked back.
A quick trip to the cad machine and 4 prints later, and all the filament stays where it is supposed to be. We haven't looked back.
1429
160
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print 4 of the ramps, then double sided tape in place in each corner as close as possible to the spool without touching (rotate one full turn to ensure that it doesn't jam). We used 3M high bond tape because we had it...
Download All Files
(757 b zip file)
Comments
You must be logged in to post a comment.
