Mini-Makerbot for Cube Farm/KeyRing
34
Likes
1217
Downloads
500
Views
Published on June 15, 2011
Description
This is a mini-makerbot for your cube farm:
thingiverse.com/thing:8012
It just wouldn't be the same without your epic 3D Printer, now would it?
ADDED:
Makerbot_V2.stl - Just a few tweaks.
Makerbot_WKeyring.stl - Added a small hole in the top corner, so it can be put on a keychain. Untested currently.
ADDED 6/17/2011:
Makerbot_v3.stl - Made outside columns thicker. Moved keyring hole to bottom, for a bigger and stronger keyring.
ADDED 6/18/2011:
Makerbot_v4.stl - Added Fan holes. Very slightly thicker nozzle.
FileCabinet.stl - Simple 3 drawer file cabinet, by request.
ADDED 6/19/2011:
Makerbot_v5.stl - Added small hole in top for mini-filament. (extrude a little bit of plastic, cut off, glue in mini-hole on top)
-Picture of white v5 with green mini-filament added.
ADDED 6/21/2011:
Makerbot_v6.stl - Deeper hole for mini-filament. Mini-USB detail added.
Base_(3,4,6).stl - Base for legs
Leg.stl - Legs
-Base and Legs added, make your mini-Makerbot into a mini robot, ready to replicate and conquer!* Or use it to display something else.
*Note that this will not actually happen...Hopefully.
thingiverse.com/thing:8012
It just wouldn't be the same without your epic 3D Printer, now would it?
ADDED:
Makerbot_V2.stl - Just a few tweaks.
Makerbot_WKeyring.stl - Added a small hole in the top corner, so it can be put on a keychain. Untested currently.
ADDED 6/17/2011:
Makerbot_v3.stl - Made outside columns thicker. Moved keyring hole to bottom, for a bigger and stronger keyring.
ADDED 6/18/2011:
Makerbot_v4.stl - Added Fan holes. Very slightly thicker nozzle.
FileCabinet.stl - Simple 3 drawer file cabinet, by request.
ADDED 6/19/2011:
Makerbot_v5.stl - Added small hole in top for mini-filament. (extrude a little bit of plastic, cut off, glue in mini-hole on top)
-Picture of white v5 with green mini-filament added.
ADDED 6/21/2011:
Makerbot_v6.stl - Deeper hole for mini-filament. Mini-USB detail added.
Base_(3,4,6).stl - Base for legs
Leg.stl - Legs
-Base and Legs added, make your mini-Makerbot into a mini robot, ready to replicate and conquer!* Or use it to display something else.
*Note that this will not actually happen...Hopefully.
Instructions
Print.
Reversal is greatly suggested. Because it is awesome.
(Also Cool -> Slowdown would be a good idea (I used 20sec for min time))
ADDED:
Found it prints a bit better when build platform temp is lower than normal, around ~100 *C.
Reversal is greatly suggested. Because it is awesome.
(Also Cool -> Slowdown would be a good idea (I used 20sec for min time))
ADDED:
Found it prints a bit better when build platform temp is lower than normal, around ~100 *C.
License
Mini-Makerbot for Cube Farm/KeyRing by bongoboy23 is licensed under the Attribution - Creative Commons license.
More from bongoboy23
yay, evil spidermakingmakerbot!