Parametric Cable Holder
11
Likes
589
Downloads
778
Views
Published on June 16, 2011
Description
For use in electronic labs to hang all the cable somewhere accesible. But they also work great at home to tidy up all your computer cables. The idea is to print multiple and attach them next to each other to hang the cables in the gap between the hooks.
You can of course also use them as normal hooks to hang up other stuff ;)
You can of course also use them as normal hooks to hang up other stuff ;)
Instructions
Print some of the size you want. The 15/7mm version is intented for thicker power cables, while the 10/5mm is better for smaller cables like usb cables. Also print one endstop for the end.
You can mount them directly to a wall, but I recommend to first mount them on a plank or something and bolt that to your wall.
Parameters:
hook_thickness: How wide the hook is, eg. 15 or 10mm. The larger the plugs the higher you probably want this.
spacing_thickness: How wide the gap gets, eg. 7 or 5mm. Change that to best fit your cables.
extend: The length of the hook, how much it sticks out of the wall.
The rest should be fairly self explanatory.
You can mount them directly to a wall, but I recommend to first mount them on a plank or something and bolt that to your wall.
Parameters:
hook_thickness: How wide the hook is, eg. 15 or 10mm. The larger the plugs the higher you probably want this.
spacing_thickness: How wide the gap gets, eg. 7 or 5mm. Change that to best fit your cables.
extend: The length of the hook, how much it sticks out of the wall.
The rest should be fairly self explanatory.
You must be logged in to post a comment.
License
Parametric Cable Holder by iliis is licensed under the Attribution - Non-Commercial - Share Alike license.
More from iliis
Added hanger tag for the taghunt.