Rostock MAX purge area/nozzle cleaner
by npushis, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Two piece wire brush holder to catch purged material and wipe nozzle clean before printing. Part_b is removable to allow for full bed printing.
Thing is made to fit the 1" upright extrusions on the Rostock MAX from SeeMeCNC.
2x 1" t-slot nuts for 1/4-20 bolts
2x 1/4-20 bolts around 1/2" long
1x Brass wire brush cup, standard dremel shaft size
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rostock MAX purge area/nozzle cleaner by npushis is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving npushis a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure npushis would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).