Longboard clamp for GoPro camera
by daGHIZmo, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a GoPro attachment for longboards, skateboards and anything else has a flat surface
Hardware is made with M4 screws and nuts
To prevent any loss of nuts during activities my design involves use of captive nuts ... so remember to pause the printing and inser nuts in their housing
test video : https://youtu.be/1ejxgdxdSbY
Consider that is 205 mm long (about 8inches), so you need a 200x200 mm printing area and print it on the diagonal of the square
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Longboard clamp for GoPro camera by daGHIZmo is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving daGHIZmo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure daGHIZmo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).