Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Decent Coaster (Hotel Set Piece One)
by Stanistani, published
1271
510
Report Thing as Inappropriate
Description
Part of my proposed Hotel Set, which will comprise a Decent Coaster, a Tiny Soap Dish, a Pocket Door Stop, a Concise Door Hanger, and a Fork or Chopstick Rest.
It's an internally self-draining coaster for use in a hotel. You never have a decent coaster in a hotel room.
See my article here on my blog.
New version of coaster, both STL and source from Sketchup drawing.
It's an internally self-draining coaster for use in a hotel. You never have a decent coaster in a hotel room.
See my article here on my blog.
New version of coaster, both STL and source from Sketchup drawing.
Recent Comments
view all
I printed this, but didn't realize it was a work in progress. The bottom of the coaster is not flat, which made the print pretty difficult. Only the outside rim touches the build platform. If the inner part of this circle were touching the platform, that would help the design.
The teeth in the center are prone to breaking. The bottoms of these pillars should probably be tapered into the bottom (as opposed to coming down flush at a right angle) for added strength.
I think the teeth in the center are pretty far apart. I'd probably prefer them closer together.
1271
510
Report Thing as Inappropriate
Tags
License
Decent Coaster (Hotel Set Piece One) by Stanistani is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Decent Coaster (Hotel Set Piece One) by Stanistani is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(34 kb zip file)
Comments
You must be logged in to post a comment.
I printed this, but didn't realize it was a work in progress. The bottom of the coaster is not flat, which made the print pretty difficult. Only the outside rim touches the build platform. If the inner part of this circle were touching the platform, that would help the design.
The teeth in the center are prone to breaking. The bottoms of these pillars should probably be tapered into the bottom (as opposed to coming down flush at a right angle) for added strength.
I think the teeth in the center are pretty far apart. I'd probably prefer them closer together.