Mini printed pegboard
by jpcw, published
Description
Had a little trouble printing without a raft as it wanted to print the circles first and they didn’t stick too well. Still came out fairly well though.
I have added the files for a small pin. The idea is that you can print holders with a 5mm hole and then use the pin to attach them to the pegbord
Next step is to print some hangers to go with it.
Recent Comments
view all
I have added the files for a small pin/peg. The idea is that you can print holders with a 5mm hole and then use the peg to attach them to the pegboard. By printing the peg separately it will simplify the design of any holders and also allow the holders to be screwed into things if you don
’t want to use the pegboard.
I have also uploaded the pin as a separate project here http://www.thingiverse.com/thi...
An example holder can be found here http://www.thingiverse.com/thi...
Thanks that helped a lot. Still got a slight issue with the back left hand corner, looks like the platform isn't quite level but way better than what it was before.
There's a setting in ReplicatorG under "Raft" called "Object First Layer." Just lower the feedrate and flowrates to be lower - say 0.3 for both, and it will let you print some of those details raftless. Good luck!
Tags
License
Give a Shout Out
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
There's a setting in ReplicatorG under "Raft" called "Object First Layer." Just lower the feedrate and flowrates to be lower - say 0.3 for both, and it will let you print some of those details raftless. Good luck!
Thanks that helped a lot. Still got a slight issue with the back left hand corner, looks like the platform isn't quite level but way better than what it was before.
I have added the files for a small pin/peg. The idea is that you can print holders with a 5mm hole and then use the peg to attach them to the pegboard. By printing the peg separately it will simplify the design of any holders and also allow the holders to be screwed into things if you don
’t want to use the pegboard.
I have also uploaded the pin as a separate project here http://www.thingiverse.com/thi...
An example holder can be found here http://www.thingiverse.com/thi...