Peg board peg
by jpcw, published
0
Share
910
344
Report Thing as Inappropriate
Description
This is a small peg I made for the mini printable peg board thingiverse.com/thing:9430
It allows you to attach holders that have a screw hole to either the mini pegboard or a normal full size one. Now you can print up holders that can be screwed to a wall or attached to a pegboard.
It allows you to attach holders that have a screw hole to either the mini pegboard or a normal full size one. Now you can print up holders that can be screwed to a wall or attached to a pegboard.
910
344
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
On your holders you need a 5mm hole. Putting a 7.5mm recess with a depth of 1.5mm around the hole should allow the pin to sit flush.
You can find an example here thingiverse.com/thing:9444
You can find an example here thingiverse.com/thing:9444
Download All Files
(22 kb zip file)
Comments
You must be logged in to post a comment.
