Ps3eye mount system for reprap
by ckaos, published
0
Share
1741
959
Report Thing as Inappropriate
Description
I needed to find a way to mount a webcam on my new reprap
(and to be used with my remote control/viewing software : thingiverse.com/thing:7187) and i had an old ps3 eye just begging to be used , so here is a relatively simple mounting system to secure the webcam onto a reprap's threaded rods!
(and to be used with my remote control/viewing software : thingiverse.com/thing:7187) and i had an old ps3 eye just begging to be used , so here is a relatively simple mounting system to secure the webcam onto a reprap's threaded rods!
1741
959
Report Thing as Inappropriate
Tags
License
Ps3eye mount system for reprap by ckaos is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
The default settings are for M6 rods !!
Don't forget to adapt the mounting holes.
Thing you will need:
From the ps3 eye reprap mount file:
- print the bottom holder
- optionally print the top cover (if your machine is precise, you should be able to snap fit the camera's base onto it without the need to secure it in place with the cover
From the rod clamp file:
- print two clamp holders: this is a bit tricky, my failing extruder didn't help so it might be a non issue : the best solution with the current settings in the opencad file is to print without infill
- mount the whole assembly in place with screws/nuts and bolts
Don't forget to adapt the mounting holes.
Thing you will need:
From the ps3 eye reprap mount file:
- print the bottom holder
- optionally print the top cover (if your machine is precise, you should be able to snap fit the camera's base onto it without the need to secure it in place with the cover
From the rod clamp file:
- print two clamp holders: this is a bit tricky, my failing extruder didn't help so it might be a non issue : the best solution with the current settings in the opencad file is to print without infill
- mount the whole assembly in place with screws/nuts and bolts
Ps3eye mount system for reprap by ckaos is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(32 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
