Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Horse-sin
by terryr, published
0
Share
4259
764
Report Thing as Inappropriate
Description
Here is a printable model of a horse called ‘sin’ from Google’s 3D warehouse. The trick for me was finding a way to divide the horse so that overhangs were minimized.
I used Sketchup to divide the original model. This horse prints reasonably well on my TOM.
This model is about 50 mm tall and 80 mm long after printing and assembling.
I used Sketchup to divide the original model. This horse prints reasonably well on my TOM.
This model is about 50 mm tall and 80 mm long after printing and assembling.
Recent Comments
view all
DON`T TRY PRINTING THIS AS IT IS!
5 failed prints later figured out the reason the lower body isn't adhering... The two parts aren't at the same initial layer height - the lower part of the body is approx 0.5mm above the upper part, so gets printed floating in the air (and thus doesn't stick to the bed.
4259
764
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Just download and print.
Download All Files
(798 kb zip file)
Comments
You must be logged in to post a comment.
DON`T TRY PRINTING THIS AS IT IS!
5 failed prints later figured out the reason the lower body isn't adhering... The two parts aren't at the same initial layer height - the lower part of the body is approx 0.5mm above the upper part, so gets printed floating in the air (and thus doesn't stick to the bed.