Finger Wrench (digit spanner)
by francfalco, published
When you are in an awkward position trying to attach a nut to a bolt, a finger wrench may be just what you need. Tight corners especially, and anywhere that requires reaching into the unknown: dropping a spanner down the back of a radiator is all too easy, dropping your finger is not.
I recently discovered this great little gadget on a DIY blog but unfortunately the company that originally supplied it is no longer making the product (why not??) and i can't find anywhere to purchase existing stock.
I had to have one, so I modelled and 3D printed this little beauty and it works a treat!
Easy to use:
There is a gap all down the back side, thereby allowing one size to fit a wide range of fingers. Slip a nut or bolt into the wrench as shown in the two images. Finger pressure keeps the nut or bolt in place. The tapered slot inside the wrench prevents the nut or bolt from turning.
Suitable for 1/2inch nut/bolt and smaller.
Print PLA (http://www.faberdashery.co.uk/products-page/print-materials/mellow-yellow/) or ABS 0.2mm 100% infill for strength.
I've evolved the design to a 'Pro' version.
A sleeker design and more ergonomic on the finger
Thanks to inspiration from MD80: http://www.thingiverse.com/thing:997777
From a suggestion by bitschieber http://www.thingiverse.com/bitschieber/about
A version with more finger tip control to use with smaller fasteners
Please do not use this item with an impact wrench or any air powered tools - you may well destroy the Finger Wrench and more importantly, your finger!!
Liked ByView All
Give a Shout Out
Finger Wrench (digit spanner) by francfalco is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving francfalco a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure francfalco would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).