Loading

Syringe Flange

by drmatrix, published

Syringe Flange by drmatrix May 27, 2013

Description

The little flanges on the syringes we use to flush out patients ears are just too small to hold - so - Here is a design to increase the size of the flange on the syringe and has little grooves so your fingers won't slip when they get wet during the procedure.

Recent Comments

view all
Have added these lines at the top of the SCAD file -

// edit external diameter of syringe

// enter the RADIUS in mm here default = 9.250mm

SR = 9.250;

Just edit the value of SR to be the outside radius the syringe and all other values are calculated of of it.

If you want I can upload .stl's for different size of syringes - requested
Good question - the syringe in the photo has an external diameter of 18.5mm
so the hole the radius is 9.250mm -
Not commented so well in the code - but -
I will upload a new scad file that has a variable at the top to parametreize this value
What size syringe is this?

More from Biology

view more

Liked By

view all

License

Syringe Flange by drmatrix is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Printed with 2 shells, 25% infill, takes about 15min. to print.
Good question - the syringe in the photo has an external diameter of 18.5mm
so the hole the radius is 9.250mm -
Not commented so well in the code - but -
I will upload a new scad file that has a variable at the top to parametreize this value
Have added these lines at the top of the SCAD file -

// edit external diameter of syringe

// enter the RADIUS in mm here default = 9.250mm

SR = 9.250;

Just edit the value of SR to be the outside radius the syringe and all other values are calculated of of it.

If you want I can upload .stl's for different size of syringes - requested
What size syringe is this?
Top