USA Coin Roll Measurement Device
by PrintTo3D, published
0
Share
820
140
Report Thing as Inappropriate
Description
Sorting and rolling your coins?
This is what you need.
Simply add quarters, dimes, nickels, or those plentiful pennies into their respective holder. Once they reach the top of the slot you have the correct amount of coins to fill a roll.
Slide the roll into the holder and then push the roll and the coins out at the same time and close the ends.
This is what you need.
Simply add quarters, dimes, nickels, or those plentiful pennies into their respective holder. Once they reach the top of the slot you have the correct amount of coins to fill a roll.
Slide the roll into the holder and then push the roll and the coins out at the same time and close the ends.
Recent Comments
view all
The scale is not off. They are drawn in inches not mm or cm.
STL files do not carry units of measurement with them and therefore the size of the object must be selected.
these are not usable, the scale is off
820
140
Report Thing as Inappropriate
Tags
License
USA Coin Roll Measurement Device by PrintTo3D is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
These are untested, but should be 99.99% good to use.
If you modify the attached .stp file I only ask that you upload the modified versions if others will find them useful.
If you modify the attached .stp file I only ask that you upload the modified versions if others will find them useful.
USA Coin Roll Measurement Device by PrintTo3D is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(504 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
these are not usable, the scale is off
The scale is not off. They are drawn in inches not mm or cm.
STL files do not carry units of measurement with them and therefore the size of the object must be selected.