Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Printable S-Hook
by yepher, published
3
Share
1665
669
Report Thing as Inappropriate
Description
This is a printable S-Hook. It is very similar to "http://www.thingiverse.com/thing:7769" except you define the inside radius of the hook openings.
Recent Comments
view all
Thanks mate.
Eventually I worked it out. Open SCAD is pretty damn good : )
the scad file when opened with http://www.openscad.org/ acts like a text file that allows you to edit it and then execute the file/code and make a .stl it also has a preview function and more.
The default one did a good job for hanging my mob.
how do you adjust the parameters? Do you have to do something with the scad file?
1665
669
Report Thing as Inappropriate
Makes
Tags
License
Printable S-Hook by yepher is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Printing is very simple. Just lay the S Hook flat on the platform and it should build without any problems.
These are the parameters you can adjust:
top_hook_radius: [Mili Meters] This is the inner radius of the top S Hook
top_hook_radius = 33.5;
bottom_hook_radius: [Mili Meters] This is the inner radius of the bottom S Hook
bottom_hook_radius = 7.7;
width: [mili meters] This is the size of the S Hook body (in X&Y directions)
width = 10.0;
thickness: [Milli Meters] This is the thickness of the S Hook (in Z direction)
thickness = 60.0;
start_angle: [DEGREES] This adjusts where the opening in the S Hook starts
start_angle = -10;
end_angle: [DEGREES] This adjusts where the opening of the S Hook ends.
Normally end_angle will be ~-90 degrees. This is so the transition from top to bottom hook is smooth. If you want the opening to be somewhere else than adjust this value.
end_angle = -89;
These are the parameters you can adjust:
top_hook_radius: [Mili Meters] This is the inner radius of the top S Hook
top_hook_radius = 33.5;
bottom_hook_radius: [Mili Meters] This is the inner radius of the bottom S Hook
bottom_hook_radius = 7.7;
width: [mili meters] This is the size of the S Hook body (in X&Y directions)
width = 10.0;
thickness: [Milli Meters] This is the thickness of the S Hook (in Z direction)
thickness = 60.0;
start_angle: [DEGREES] This adjusts where the opening in the S Hook starts
start_angle = -10;
end_angle: [DEGREES] This adjusts where the opening of the S Hook ends.
Normally end_angle will be ~-90 degrees. This is so the transition from top to bottom hook is smooth. If you want the opening to be somewhere else than adjust this value.
end_angle = -89;
Printable S-Hook by yepher is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(10 kb zip file)
Comments
You must be logged in to post a comment.
The default one did a good job for hanging my mob.
how do you adjust the parameters? Do you have to do something with the scad file?
the scad file when opened with http://www.openscad.org/ acts like a text file that allows you to edit it and then execute the file/code and make a .stl it also has a preview function and more.