mini height sensor board - Differential IR Z probe mount for E3d Chimera
by iwant3d, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this so I could use the mini height sensor board with my E3d Chimera and duet electronics. Sensor link below.
I printed it in ABS to make it a bit more heat resistant as it's pretty close to the heat block, It mounts on the front of the fan.
When homing the hotend ends up being about 1.9mm away from the bed so I modified the G31 command in the config file to G31 Z1.9 P500
This way when it's homing the hotend will be 2mm away from the heatbed but once the print starts the hotend will be at the correct height.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
mini height sensor board - Differential IR Z probe mount for E3d Chimera by iwant3d is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving iwant3d a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure iwant3d would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).