Parametric Beveled Washer
by curiositytech, published
1157
422
Report Thing as Inappropriate
Description
Every six months I need to replace the rubber washer in my shower's hot faucet.
This time instead of using the soft rubber, I thought I'd try printing one out of ABS.
This time instead of using the soft rubber, I thought I'd try printing one out of ABS.
1157
422
Report Thing as Inappropriate
Remixed From
Tags
License
Parametric Beveled Washer by curiositytech is licensed under the Creative Commons - Attribution license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
In the OpenSCAD file, specify:
total_height -- the total height of the washer you want
straight_height -- if your washer has a straight, cylindrical section enter the height of that part
inner_radius -- the radius of the hole
outer_radius -- the radius of the widest part of the washer
Rerender, export to STL, then print!
total_height -- the total height of the washer you want
straight_height -- if your washer has a straight, cylindrical section enter the height of that part
inner_radius -- the radius of the hole
outer_radius -- the radius of the widest part of the washer
Rerender, export to STL, then print!
Parametric Beveled Washer by curiositytech is licensed under the Creative Commons - Attribution license.
Download All Files
(8 kb zip file)
Comments
You must be logged in to post a comment.
