Crystal Earrings
by thefabratory, published
1854
255
Report Thing as Inappropriate
Description
Press fit earrings from the future!!!
DESIGNED BY DANA HENG
DESIGNED BY DANA HENG
1854
255
Report Thing as Inappropriate
Tags
License
Crystal Earrings by thefabratory is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
1. Print file from laser cutter on 1/16" clear acrylic.
2. Carefully attach the two square pieces onto one of the trapezoidal-like side pieces.
3. Thread a small, brightly colored bead through a thin wire and tie off the end of the wire to prevent the bead from slipping.
4. Lace the wire through the hole of the larger square and thread three more beads through the wire.
5. Lace the wire through the hole of the smaller square.
6. Clip the wire and make a loop at the top of the square.
7. Attach a chain of any desired length.
8. Attach an earring finding.
9. Carefully attach the rest of the side pieces.
10. Repeat for the other side.
2. Carefully attach the two square pieces onto one of the trapezoidal-like side pieces.
3. Thread a small, brightly colored bead through a thin wire and tie off the end of the wire to prevent the bead from slipping.
4. Lace the wire through the hole of the larger square and thread three more beads through the wire.
5. Lace the wire through the hole of the smaller square.
6. Clip the wire and make a loop at the top of the square.
7. Attach a chain of any desired length.
8. Attach an earring finding.
9. Carefully attach the rest of the side pieces.
10. Repeat for the other side.
Crystal Earrings by thefabratory is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(2 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
