Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
This Thing is currently under moderation due to a violation of our Terms of Service.
Files and images for this Thing are currently unavailable.
Files and images for this Thing are currently unavailable.
.45 magnum
-
Likes
-
Downloads
-
Views
Published on June 22, 2011
Description
a gun i edited in scetchup from a previous creator
Instructions
download and print
You must be logged in to post a comment.
Pointedstick
on
June 22, 2011
said:
There is no such cartridge as a .45 magnum. There's the .45 ACP, which is a centerfire pistol cartridge (and therefore generally can't be fired in revolvers without the use of a special cylinder and a moon clip), but you're probably thinking of a .44 magnum, which is a revolver cartridge. Also, you have not attached a .stl file, which woud be needed to print this model. Finally, the model does not look well-adapted for 3D printing. I see significant overhangs. You might consider slicing the gun in half and laying each half flat. Then once the halves are printed out, you would glue them together.
License
More from Props
Most likely "45ish" candidates would be 44mag for modern and 45 LC or Long Colt for cowboy / old west.