Toy Straight Razor (Sweeney Todd)
by cevinius, published
I was recently in an amateur music theatre production of Sweeney Todd. I printed around 40 of these razors as gifts for my cast mates, production team and crew.
I printed them at full size and also at 50% scale. They came out great on my UP. The hinge works, and can be printed in place. Just wiggle the blade part and snap it open by gently pushing from the edge of the blade.
I've included a blank version as well.
It's modelled as a toy, so the dimensions are kind of short and cute.
Just print it! The hinge works, and the blade should open if you wiggle and push from below (from the "edge" of the blade).
Liked ByView All
Give a Shout Out
Toy Straight Razor (Sweeney Todd) by cevinius is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure cevinius would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).