by pmoews, published
Here is a small wooly sheep.
It was created with 123D Catch from a ceramic garden ornament. The ornament contains reflective additions and is white and shiny - see image. It was dulled with fine chocolate powder to aid 123D Catch.
The orginal sheep is 20 cm wide, 35 cm long, and 30 cm high. Wooly_sheep.stl is 33 mm wide, 57 mm long and 48 mm high, or an approximately 1/6 scale version.
It can be printed directly on the build platform. I used 5% infill and 2 shells and it printed in about 75 minutes. The ears overhang slightly but the print was fine.
Liked ByView All
Give a Shout Out
Wooly Sheep by pmoews is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure pmoews would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).