Case for B3603 Step Down Module
by ramminger, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Case for the B3603 Step Down Module found on Ebay. It´s a good choice to make a cheap Battery Charger or a adjustable Power Supply.
The Buttons and the Ledlenses are made from 3mm Filament.
The Connectors are XT60.
For easyier printing i filled out the first Layer on the Frontplate. Clear the holes with an 3mm Drill Bit.
The holes on the back are for pole terminals, which i didn't use yet.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Case for B3603 Step Down Module by ramminger is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ramminger a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ramminger would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).