Switch Box for TOM
by BoyScoutHighTechCamp, published
708
445
Report Thing as Inappropriate
Description
This is the first "thing" that I designed in OpenSCAD. When I first received the "Thing-O-Matic", I purchased 1 meter of White and Blue LEDs. I finally got around to installing them this weekend.
I wanted to be able to turn on the "funky" Blue LEDs, the White LEDs, or just have the LEDs under the extruder turned on/off.
This is designed to use 1/2" push button switches for three circuits. The hole in the bottom is to bring the circuits in.
Just print this and then use 3M x 5 bolts to affix it to the top of a MakerBot.
I wanted to be able to turn on the "funky" Blue LEDs, the White LEDs, or just have the LEDs under the extruder turned on/off.
This is designed to use 1/2" push button switches for three circuits. The hole in the bottom is to bring the circuits in.
Just print this and then use 3M x 5 bolts to affix it to the top of a MakerBot.
708
445
Report Thing as Inappropriate
Tags
License
Switch Box for TOM by BoyScoutHighTechCamp is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print the case and your choice of bottom, and close it with (4) 3M bolts of your choice. You can affix it to the top of the TOM using bolts that just "touch" the wood.
Switch Box for TOM by BoyScoutHighTechCamp is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(52 kb zip file)
Comments
You must be logged in to post a comment.
