Small toy, key ring or rattle
7
Likes
144
Downloads
339
Views
Published on June 30, 2011
Description
Small toy, key ring or rattle with loose ball inside impossible to remove. This simple design was specially conceptualized to experiment with MakerBot, since it was not clear how act to stop the ball centered and suspended as was outlined in the Cad file.
The machine created a thin thread that supported structural and position to the area, could be easily removed with a cutter.
The machine created a thin thread that supported structural and position to the area, could be easily removed with a cutter.
Instructions
Made with MakerBot by a single extrusion. Designed in Rhinoceros, drawing an area in the center of a hexahedron with open faces. ABS plastic extrusion made structure around the sphere to suspended in space. This structure will be easily removed with a cutter so that the ball is moving.
1. Create by a hexahedron solid of dimensions 30x30x30 mm.
2. Create by solid sphere of radius a 16 mm.
3. Created by a rectangular base solid 15x15 long indifferent, since only be used for Boolean subtract the initial cube.
4. Copy 2 times the parallelepiped.
5. Turn a plane YZ.
6. Turn another plane XZ.
7. Boolean Subtract the 3 parallelepipeds for the hexahedron.
1. Create by a hexahedron solid of dimensions 30x30x30 mm.
2. Create by solid sphere of radius a 16 mm.
3. Created by a rectangular base solid 15x15 long indifferent, since only be used for Boolean subtract the initial cube.
4. Copy 2 times the parallelepiped.
5. Turn a plane YZ.
6. Turn another plane XZ.
7. Boolean Subtract the 3 parallelepipeds for the hexahedron.
License
Small toy, key ring or rattle by Martikax2 is licensed under the Attribution - Creative Commons license.
More from Martikax2
You must be logged in to post a comment.