MK Extruder LED Arch
by PrintTo3D, published
Description
This was designed for the MK5, but should work with other extrusion heads as far as I know.
I also included "split" stl files that should fit on the Cupcake/TOM for printing however I printed it in one piece on my Dimension.
If you need even more sunshine print two of these! One for the front and one for the back!
Recent Comments
view all
I have about 20 some feet of white LED strip laying around, this isnt a bad idea. I'll go warm up the extruder...
All you need to do is tap into any of the extra 12 volt connectors off the power supply.
I cut one of the funky connectors off of mine and added my own JST connectors so I can easily unplug it if needed.
I believe the 12 volt wires are typically yellow.
where on any of the circuit boards in the TOM would you attach the power for the lights? Or is this something that must be powered separately?
Tags
License
Give a Shout Out
Instructions
hobbyking.com/hobbyking/store/uh_listCategoriesAndProducts.asp?idCategory=280&curPage=1&sortlist=&LiPoConfig=&qty=30
You may also need longer M3 bolts and some washers.
Solder
Mount
LIGHT!
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
where on any of the circuit boards in the TOM would you attach the power for the lights? Or is this something that must be powered separately?
All you need to do is tap into any of the extra 12 volt connectors off the power supply.
I cut one of the funky connectors off of mine and added my own JST connectors so I can easily unplug it if needed.
I believe the 12 volt wires are typically yellow.
I have about 20 some feet of white LED strip laying around, this isnt a bad idea. I'll go warm up the extruder...