Sign of the Horns - On A Plinth
by doommeister, published
Loved the sign of the horns (http://www.thingiverse.com/thing:9541) but it was not stable enough to stand on its own. Strangely good for point at things with though. I added a plinth to allow me to clutter up my desk with.
Liked Byview all
Give a Shout Out
I scaled the model to 90% due to a height issue on my current setup. Use the SCAD file to scale the horns back if you like, the original .stl is required in the same folder as the SCAD file