Ultimaker 2 Feet with Vibration Resistance
by wisar, published
Use This Project
Give a Shout Out
This thing incorporates elements from a number of designs but most resembles the feet that I chose as the base of the remix. About the name and the vibration resistance aspect...I HAVE NO IDEA IF THIS ACTUALLY WORKS! I should do some tests but have not gotten around to it. It could help, it could make no difference, it could even be a negative! Even without the springs I like the feet as it gives me some room under the printer for a little drawer!
There are two choices of leg style, one with straight corners and the other where they are beveled. I printed everything with a .2 layer height in PLA. Note that I use two springs in the front but three in the back as it is much heavier. The springs are a big variable and will depend on your material, your infill percentage, whether you have the filament spool on the back (I do not), etc. You will need to experiment. There are other things that could be used as well.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Ultimaker 2 Feet with Vibration Resistance by wisar is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving wisar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure wisar would love to see what you've printed. Please document your print and share a Make with the community.