Spektrum Dx6i Roller Wheel
by PrintTo3D, published
0
Share
2208
259
Report Thing as Inappropriate
Description
My friend broke the roller menu wheel on his RC transmitter. Without the roller the radio is pretty much useless as it controls model selection and programming.
Here is a printable replacement. You will need a printer capable of fine detail and support.
The hex is only .07" edge to edge.
Here is a printable replacement. You will need a printer capable of fine detail and support.
The hex is only .07" edge to edge.
Recent Comments
view all
The majority of my STL files on here are in inches not millimeters.
I think the model scale for your stl file might be wrong. Did you use imperial or metric units? I think I had to scale it up by a factor of x27 to work with Cura.
2208
259
Report Thing as Inappropriate
Tags
License
Spektrum Dx6i Roller Wheel by PrintTo3D is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Remove six screws on the back of the radio.
One the back housing is removed there are two screws holding the menu PCB in place.
Replace roller and screw radio back together.
One the back housing is removed there are two screws holding the menu PCB in place.
Replace roller and screw radio back together.
Spektrum Dx6i Roller Wheel by PrintTo3D is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(44 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
I think the model scale for your stl file might be wrong. Did you use imperial or metric units? I think I had to scale it up by a factor of x27 to work with Cura.
The majority of my STL files on here are in inches not millimeters.