(moved) Belt clip for Zoom H4n field recorder
by MarcusWolschon, published
Description
THIS DESIGN HAS BEEN MOVED TO YOUMAGINE:
youmagine.com/designs/belt-clip-for-zoom-h4n-field-recorder-mark-ii
Reasons:
marcuswolschon.blogspot.de/2014/01/leaving-thingiverse.html
This is a belt clip to use your H4n field recorder to actually record in the field.
It is based on my spider mount for the H4n but has holes to access the most common buttons on the side
(that are not needed in the spider mount because that is used together with the remote.)
I added an access-hole to the 1/4 bolt and sunk that bold a bit to not damage the belt.
The corners touched by human hands are of cause rounded.
Blog post:
marcuswolschon.blogspot.com/2011/07/belt-clip-for-zoom-h4n-field-recorder.html
Update: 2011-07-12
* placement of hole for volume-keys optimized
* easier to print if you have warping issues
Update: 2011-07-13
* tested and last changes for the 1/4" bolt used
* 3d assembly created
* managed to get 3d-assembly, 3d-body and 2 2d technical drawings into the PDF
Update: 2011-07-26
* added a mirrored version to carry the H4n on the other right hip instead of the left. (With the microphones facing forward.)
License is CC-BY-NC-SA
So you may make one yourself and improve the design but not sell the design or made parts and always give attribution.
youmagine.com/designs/belt-clip-for-zoom-h4n-field-recorder-mark-ii
Reasons:
marcuswolschon.blogspot.de/2014/01/leaving-thingiverse.html
This is a belt clip to use your H4n field recorder to actually record in the field.
It is based on my spider mount for the H4n but has holes to access the most common buttons on the side
(that are not needed in the spider mount because that is used together with the remote.)
I added an access-hole to the 1/4 bolt and sunk that bold a bit to not damage the belt.
The corners touched by human hands are of cause rounded.
Blog post:
marcuswolschon.blogspot.com/2011/07/belt-clip-for-zoom-h4n-field-recorder.html
Update: 2011-07-12
* placement of hole for volume-keys optimized
* easier to print if you have warping issues
Update: 2011-07-13
* tested and last changes for the 1/4" bolt used
* 3d assembly created
* managed to get 3d-assembly, 3d-body and 2 2d technical drawings into the PDF
Update: 2011-07-26
* added a mirrored version to carry the H4n on the other right hip instead of the left. (With the microphones facing forward.)
License is CC-BY-NC-SA
So you may make one yourself and improve the design but not sell the design or made parts and always give attribution.
Makes
Tags
License
(moved) Belt clip for Zoom H4n field recorder by MarcusWolschon is licensed under the Attribution - Non-Commercial - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
I already oriented the STL for printing.
Because my Thing-o-Matic is out of order due to a defective PCB,
I'll have to wait until I'm back home with my RepMan to actually print this.
Because my Thing-o-Matic is out of order due to a defective PCB,
I'll have to wait until I'm back home with my RepMan to actually print this.
(moved) Belt clip for Zoom H4n field recorder by MarcusWolschon is licensed under the Attribution - Non-Commercial - Share Alike license.
Download All Files
(423 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
Added a mirrored version to carry the Zoom H4n on the other side.