Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Cryptex Ring
by NateTG, published
0
Share
1755
1064
Report Thing as Inappropriate
Description
Attempt at a cryptex ring. The large ring has 26 interior facets. There's not enough clearance, but they should mesh with the 26 outer facets of the middle ring. The inner ring is probably unnecessary. Again, I'm not entirely sure about clearances and fits, but it should be possible to set the 'correct' position by raising the sleeve 1/2 the height.
Also still figuring out OpenSCAD and Thing-A-Verse
The recently uploaded openscad file is an attempt to make things parametric and a bit more printer friendly.
Also still figuring out OpenSCAD and Thing-A-Verse
The recently uploaded openscad file is an attempt to make things parametric and a bit more printer friendly.
Recent Comments
view all
Hey Nate,
Awesome work! When I want parts that fit snugly, I give them 0.2-0.25mm clearance around the smaller part. When I want parts that will move, slide, or rotate against each other I give them 0.4-0.5mm clearance around the smaller part. I hope this helps!
1755
1064
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Download All Files
(617 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
Hey Nate,
Awesome work! When I want parts that fit snugly, I give them 0.2-0.25mm clearance around the smaller part. When I want parts that will move, slide, or rotate against each other I give them 0.4-0.5mm clearance around the smaller part. I hope this helps!