Makerbot Button Holder
by Quiksilver, published
1444
284
Report Thing as Inappropriate
Description
This is a nice little button holder that will let you install a button in the existing holes on the top of the TOM. Saves drilling and adding more holes to your Makerbot.
Recent Comments
view all
Nice. I made an E-Stop for mine originally that fit there, never thought of printing one so I could get a smaller button!
1444
284
Report Thing as Inappropriate
Tags
License
Makerbot Button Holder by Quiksilver is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print and install.
You may need to adjust the hole diameter to accommodate for your button. Mine required a 16mm hole. In my case I had an interference fit to keep it in place as the fastening nut that came with the button wouldn't quite fit. When the button is installed in the holder all you need do is snap it into any of the holes on the top of your TOM that you have free. The little tabs work great and allow easy removal if required.
You may need to adjust the hole diameter to accommodate for your button. Mine required a 16mm hole. In my case I had an interference fit to keep it in place as the fastening nut that came with the button wouldn't quite fit. When the button is installed in the holder all you need do is snap it into any of the holes on the top of your TOM that you have free. The little tabs work great and allow easy removal if required.
Makerbot Button Holder by Quiksilver is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(446 kb zip file)
Comments
You must be logged in to post a comment.
Nice. I made an E-Stop for mine originally that fit there, never thought of printing one so I could get a smaller button!