Snap in parametric hole cover
by jag, published
0
Share
910
249
Report Thing as Inappropriate
Description
This is a parametric snap in cover to go in a hole in sheet metal (or whatever)
After printing out new handles for our screen door ( thingiverse.com/thing:9882 ) there were 4 extra holes left over that were intended to be used if the door opened the other way.
Now they are filled in...
After printing out new handles for our screen door ( thingiverse.com/thing:9882 ) there were 4 extra holes left over that were intended to be used if the door opened the other way.
Now they are filled in...
910
249
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
The scad file is quite adjustable. You can adjust the size of the cover, the diameter of the hole, the number of sections cut of it to make it snap in. The size of the barb and more.
The included STL file is set up for a .25" hole in at most 2mm thick material.
You will probably have to play with the settings to get it perfect but it's a pretty quick print.
The included STL file is set up for a .25" hole in at most 2mm thick material.
You will probably have to play with the settings to get it perfect but it's a pretty quick print.
Download All Files
(6 kb zip file)
Comments
You must be logged in to post a comment.
