3mm Drill Bit Handle
by Alzibiff, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Customized version of http://www.thingiverse.com/thing:91035
Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=91035
It has just occurred to me that you could either make several of these to accommodate single drill bits or make two or three with each one capable of taking three or four sizes if you use long enough grub screws and are prepared to swop the drill bits as and when needed.
Tried my 8mm version with some different sized drill bits and found that the range of sizes which you can fit securely is not that large - will print some more and use one drill bit per handle. (Total filament with 15% infill is only around 2m anyway).
Using the following options:
Drill_Bit_Length = 20
Resolution = 25
Drill_Bit_Diameter_Units = 1
Set_Screw_Nut_Thickness = 3
Set_Screw_Nut_Diameter = 5.5
Drill_Bit_Diameter = 3
Number_of_Nut_Traps = 2
Set_Screw_Diameter = 3
Handle_Length = 65
Handle_Diameter = 15
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
3mm Drill Bit Handle by Alzibiff is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Alzibiff a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Alzibiff would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).