Loading

Servo mounting bracket

by wsolstice69, published

Servo mounting bracket by wsolstice69 Jul 7, 2011

Description

This is a mounting bracket that I designed for mounting hobby servos for a robot I am working on.

Recent Comments

view all
where my servo mounting screws went into the 2 holes on the either side of the vertical panels. I was using a HS-311 servo and the screws that came with it.
What part of it split?
I tried this but it split easily when I tried to mount with normal servo screws.

More from Robotics

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

I have successfully printed this in ABS with a 20% infill and 3 layers for the solid surface thickness.

<p>I tried this but it split easily when I tried to mount with normal servo screws.</p>

<p>What part of it split?</p>

<p>where my servo mounting screws went into the 2 holes on the either side of the vertical panels. I was using a HS-311 servo and the screws that came with it.</p>

<p>muy bueno!!</p>

<p>apenas para mi proyecto :) </p>

<p>http://liure.uk.to/doku.php?id=calinwire&lt;/p&gt;

<p>es muy fr<br>ágil</p>

<p>I printed it in ABS with a 0.35mm layer height, 20% in-fill and 3 layers for the solid surface thickness. I tried using some PLA but my Skeinforge settings were not quite right and it did not come out as well, but it was still strong.</p>

<p>Are you getting good adhesion for your layers?</p>

Top