Adjustable Feet for MakerBot
by jib, published
1
Share
954
469
Report Thing as Inappropriate
Description
These adjustable feet are designed to be installed on the bottom of a MakerBot for easy leveling.
brought to you by:
tinkerdepot.com
[email protected]
brought to you by:
tinkerdepot.com
[email protected]
954
469
Report Thing as Inappropriate
Makes
Tags
License
Adjustable Feet for MakerBot by jib is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Foot Assembly
-Break and clean out the rings supporting the bolt cavity in the bottom of the foot(round part) with a small flat head screw driver.
-From the bottom insert one #10 washer and the bolt.
-From the top insert another #10 washer and install the #10-32 nut and tighten.
Receptacle Assembly
-Insert a #10-32 nut into the hex shaped cavity.
-Press fit the printed plastic ring to cover/retain the nut.
Foot Assembly
-Insert foot into the side of the receptacle that has the retainer ring.
-Install the anti-skid pad.
-Use double sided tape to secure the to bottom of the TOM.
-Break and clean out the rings supporting the bolt cavity in the bottom of the foot(round part) with a small flat head screw driver.
-From the bottom insert one #10 washer and the bolt.
-From the top insert another #10 washer and install the #10-32 nut and tighten.
Receptacle Assembly
-Insert a #10-32 nut into the hex shaped cavity.
-Press fit the printed plastic ring to cover/retain the nut.
Foot Assembly
-Insert foot into the side of the receptacle that has the retainer ring.
-Install the anti-skid pad.
-Use double sided tape to secure the to bottom of the TOM.
Adjustable Feet for MakerBot by jib is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(97 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
