.50 Cal Ammo Box Firework Controller
by ROBK636, published
0
Share
2128
607
Report Thing as Inappropriate
Description
Wanted to upload the template I made when I bult my fire work controller.
More pictures of the one that I made can be found here:
instructables.com/id/Firework-Controller-Build/
More pictures of the one that I made can be found here:
instructables.com/id/Firework-Controller-Build/
2128
607
Report Thing as Inappropriate
Tags
License
.50 Cal Ammo Box Firework Controller by ROBK636 is licensed under the Attribution - Non-Commercial - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
panel can be cut from most sheet metals/ plastics or into the side of the box even.
Drill/ Laser/ Plasma the holes in your panel and mount them to the schematic done by systemf92 instructables.com/id/Fireworks-Controller/
Keep in mind that I used Binding Posts so the wire can be connected by unscrew. Unlike Speaker Terminals that systemf92 used that have to be pushed. Adjust template as need to fit your design or use of other switches or whatever.
Drill/ Laser/ Plasma the holes in your panel and mount them to the schematic done by systemf92 instructables.com/id/Fireworks-Controller/
Keep in mind that I used Binding Posts so the wire can be connected by unscrew. Unlike Speaker Terminals that systemf92 used that have to be pushed. Adjust template as need to fit your design or use of other switches or whatever.
.50 Cal Ammo Box Firework Controller by ROBK636 is licensed under the Attribution - Non-Commercial - Share Alike license.
Download All Files
(213 kb zip file)
Comments
You must be logged in to post a comment.
