10 way liquid dispenser
by Nagalfar, published
Inspired by a turkish tea set I created this 10 way drink dispenser. More of an eye catcher than a time saver but funny and definitely working. Is work in progress, I'm thinking about switchable heads for 6, 8 and 10 persons atm.
Print upside down, resolution doesn't matter fill of 10 should be enought, but I recommend using ReplicatorG with the following changes on your skeinforge profile:
Diaphragm Thickness (layers): 2
Solid Surface Thickness (layers): 5
With standard settings it may not be fully watherthight, at least Prototype #2 wasn't.
Finished product uses about 200g or 70 meters of fillament and took 12,8 hours with sailfish on a Rep2 and feedrate of 120 and 0.2 resolution.
Liked ByView All
Give a Shout Out
10 way liquid dispenser by Nagalfar is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Nagalfar would love to see what you've printed. Please document your print and share a Make with the community.