Soap bubble box
by TopperDEL, published
0
Share
1047
850
Report Thing as Inappropriate
Description
This is my first attempt to create a "soap bubble box". My girlfriend came up to that idea, but you may see this thing as an inspiration: thingiverse.com/thing:3449
It may need some updates, though. The hole where you put the wand might be too big, but can be filled with hot glue. I thought: better too big than too small. ;)
The cap fits too strong on the box. You may need to adjust the scad file or to sand down enough plastic. Otherwise you may distribute the water in it when trying to open it. ;) And do not try to "sand" it by turning the cap against the box in a quick manner - this produced a lot heat and melt both pieces together. That happened to me (stupid guy, I know. Should have known that heating-issue... ). ;)
It may need some updates, though. The hole where you put the wand might be too big, but can be filled with hot glue. I thought: better too big than too small. ;)
The cap fits too strong on the box. You may need to adjust the scad file or to sand down enough plastic. Otherwise you may distribute the water in it when trying to open it. ;) And do not try to "sand" it by turning the cap against the box in a quick manner - this produced a lot heat and melt both pieces together. That happened to me (stupid guy, I know. Should have known that heating-issue... ). ;)
1047
850
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
1. Print one piece of "Seifenblase Deckel" (cap).
2. Print one piece of "Seifenblase Dose" (box).
3. Print one piece of "Seifenblase Stab" (wand).
4. Sand the conenction between box and cap until it fits easily.
5. Hot glue the wand into the box.
6. Have fun. ;)
I would really appreciate any help in how to make a winding, so that the cap can be winded onto the box. I did not managed to get that.
2. Print one piece of "Seifenblase Dose" (box).
3. Print one piece of "Seifenblase Stab" (wand).
4. Sand the conenction between box and cap until it fits easily.
5. Hot glue the wand into the box.
6. Have fun. ;)
I would really appreciate any help in how to make a winding, so that the cap can be winded onto the box. I did not managed to get that.
Download All Files
(36 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
