Loading

About bathrobotics

BathRobotics, Chartered Engineer based in Bath with an interest in Robotics. Bath Robotic.
http://3d.andysouthern.com

EUR ING Andy Southern

According to Thingiverse records, I've only just exceeded 100 Design uploads - I just totted up my daily uploads and ones prior and recon it's already 26 Design Uploads ahead of the official total.

But I'm currently doing a nice "100th Design" come back soon.
Last Year I made a New Year’s resolution to upload 1 open source design each day.
It was very ambitious, and ultimately doomed to failure. Too optimistic. I eventually culled it down to “1 Design per weekday” – but it still got the better of me.

One demotivating factor was when Thingiverse accidentally lost file descriptions with degree signs (°) or diameter signs in (Ø). Both of these feature quite prominently on my description pages (and here).

It was fun. So here I go again!

This is basically keeping me off Facebook or Youtube, represents an average of 3-4hours computer time a week (How long do you watch Kittens on YouTube for?) – and hopefully does something constructive.

I do get a kick when people upload prints they’ve done, or follow me.

08/05/2018 Dummy Model of a 608 Bearing https://www.thingiverse.com/thing:2900601
06/05/2018 Dummy Model of Hobbed Direct Drive Shaft https://www.thingiverse.com/thing:2896756 modelled by my daugher!
05/05/2018 DUMMY Model of a NEMA17 Stepper Motor https://www.thingiverse.com/thing:1757165


14/10/16 DELETED FACEBOOK (not a part, just a positive lifestyle choice)
14/07/16 Carbonara Pot (Dummy) http://www.thingiverse.com/thing:1673507
21/06/16 Brexit: Stronger In EU Badge http://www.thingiverse.com/thing:1638762
20/06/16 VW Sharan / Alhambra Seat Adjustment Handle http://www.thingiverse.com/thing:1586975
11/05/16 Peachy Printer Fraud: Where is your money? http://www.thingiverse.com/thing:1555287
04/04/16 Trunki Wheel Clip http://www.thingiverse.com/thing:1457450
03/04/16 Trunki Wheel Bogey http://www.thingiverse.com/thing:1457450
02/04/16 Trunki Wheel Idealised http://www.thingiverse.com/thing:1457450
01/04/16 Trunki Wheel Printable http://www.thingiverse.com/thing:1457450

March:
30/03/16 Port Talbot / Llanwern Works British Steel "Badge" : http://www.thingiverse.com/thing:1453821
29/03/16 Taller Tantalus (Blank): http://www.thingiverse.com/thing:1406765
28/03/16 Taller Syphon Tantalus: http://www.thingiverse.com/thing:1406765

24/03/16 Descriptive Geometry: TearDrop Hole Lesson http://www.thingiverse.com/thing:1441047
23/03/16 The 100th Upload Syphon Cup http://www.thingiverse.com/thing:1406765
21/03/16 Improved Nokia Battery Holder http://www.thingiverse.com/thing:1430671

10/03/16 Octohedron http://www.thingiverse.com/thing:1376644
09/03/16 Octohedron Formation 2 http://www.thingiverse.com/thing:1376644
08/03/16 Octohedron Formation 1 http://www.thingiverse.com/thing:1376644
07/03/16 Stretched 10 Sided Dice http://www.thingiverse.com/thing:1376644

04/03/16 10 Sided Dice http://www.thingiverse.com/thing:1376644
03/03/16 Dodecahedron http://www.thingiverse.com/thing:1376644
02/03/16 Rounded Dodecahedron http://www.thingiverse.com/thing:1376644
01/03/16 Half Dodecahedron Construction http://www.thingiverse.com/thing:1376644

February:

29/02/16 Two / Three faces of Dodecahedron construction http://www.thingiverse.com/thing:1376644
26/02/16 NOKIA LCD Shield (for Arduino) http://www.thingiverse.com/thing:1368044
25/02/16 Arduino Nano Dummy http://www.thingiverse.com/thing:1370900
24/02/16 Nerf Dart Dummy (DON'T PRINT!) http://www.thingiverse.com/thing:1368160

10/02/16 Ø22mm 90° Elbow for Pipe -Lying down (Mat'l optimised) http://www.thingiverse.com/thing:1329859
09/02/16 VW Dial Clock Holder For GS4 TALL http://www.thingiverse.com/thing:1334070
08/02/16 VW Dial Clock Holder For GS4 W/Rabbit Ears http://www.thingiverse.com/thing:1327029

05/02/16 IKEA shelf Stretch Pins http://www.thingiverse.com/thing:1318573
04/02/16 Volkswagon (VW) Samsung GS4 Holder http://www.thingiverse.com/thing:1318486
03/02/16 Girl Guide Brownie Badge Sash (Single Width) http://www.thingiverse.com/thing:1313352
02/02/16 Girl Guide Brownie Badge Sash (Double Width) http://www.thingiverse.com/thing:1313356
01/02/16 Girl Guide Brownie Badge Sash (OBSOLETE) http://www.thingiverse.com/thing:1310866

January:
25/01/16 Creo Elements crashed on me and I lost the last thing I designed. Taking a week off to do some microprocessor programing.

22/01/16 T-Piece Ø22mm PVC Pipe - V3- OPTIMISED http://www.thingiverse.com/thing:1293282
21/01/16 IKEA Printable Billy Pin (45° version) http://www.thingiverse.com/thing:1277243
20/01/16 IKEA Printable Billy Pin. http://www.thingiverse.com/thing:1275431
19/01/16 IKEA Simplified Billy Pin. http://www.thingiverse.com/thing:1275431
18/01/16 IKEA Mass Produced Billy Pin. http://www.thingiverse.com/thing:1275431

15/01/16: VW Sharan Trim Clip (3D Printed) http://www.thingiverse.com/thing:1274409
14/01/16 VW Sharan Trim Clip (as Mass-produced) http://www.thingiverse.com/thing:1261167
13/01/16 "10 Today" Candle Sign http://www.thingiverse.com/thing:1256297
12/01/16 Birthday Cake Flare Dummy http://www.thingiverse.com/thing:1252339
11/01/16 Extractor Fan Pull Switch Weight http://www.thingiverse.com/thing:1245245

08/01/16 LightBulb Motif Pull Switch Weight (no thread) http://www.thingiverse.com/thing:1245245
07/01/16 LightBulb Motif Pull Switch Weight http://www.thingiverse.com/thing:1245245
06/01/16 Hand Towel Dispenser Clip (Katrin) http://www.thingiverse.com/thing:1246988
05/01/16 Bigger Pull Switch Weight http://www.thingiverse.com/thing:1245245
04/01/16 Pull Switch Weight http://www.thingiverse.com/thing:1245245

01/01/16 Iris Lid Box Additional Part http://www.thingiverse.com/thing:1237814

(Hiatus.... until 2016.....)

02 06 2015 LDR Holder / test rig http://www.thingiverse.com/thing:859602
01 06 2015 LDR electronic component: http://www.thingiverse.com/thing:858043
13 05 2015 FLOWER LUGGAGE POLLEN ONLY http://www.thingiverse.com/thing:824451
12 05 2015 FLOWER LUGGAGE_PETALS ONLY http://www.thingiverse.com/thing:824451
11 05 2015 FLOWER LUGGAGE TAG http://www.thingiverse.com/thing:822449
08 05 2015 DUMMY LED http://www.thingiverse.com/thing:806060
07 05 2015 DUMMY PUSH BUTTON http://www.thingiverse.com/thing:806060
06 05 2015 DUMMY 10 WAY DIL SWITCH http://www.thingiverse.com/thing:806060
05 05 2014 DUMMY PCB Door Opener. http://www.thingiverse.com/thing:805722
04 05 2015 PRINTABLE Rubber Buttons for Door Remote http://www.thingiverse.com/thing:804378
01 05 2015 Rubber Buttons for Door Opening Remote http://www.thingiverse.com/thing:804309
30 04 2015 Guest Design: DELETED (SORRY!)
29 04 2015 Laser Diode Holder (SOCKET) http://www.thingiverse.com/thing:798533
28 04 2015 Laser Diode Holder (BALL) http://www.thingiverse.com/thing:798533
27 04 2015 Servo Stand / Test Bed for SG90 -http://www.thingiverse.com/thing:794177
24 04 2015 Servo Tower Pro SG90 Model - Do Not Print(!) http://www.thingiverse.com/thing:787942
23 04 2015 Solar Cell http://www.thingiverse.com/thing:785665
22 04 2015 Ball Bearing 10x5x4, MR105ZZ, http://www.thingiverse.com/thing:785492
21 04 2015 Axminster Band Saw Guard Plate (Air Holes) http://www.thingiverse.com/thing:780908
20 04 2015 Axminster Band Saw Guard Plate (No Holes) http://www.thingiverse.com/thing:780900
17 04 2015 DELETED FACEBOOK (not a part, just a positive lifestyle choice)
05 04 2015 HTC HERO (ANATOMICALLY CORRECT) -Don't Print! https://www.thingiverse.com/thing:757688
01 04 2015 April 1st Test Piece. https://www.thingiverse.com/thing:752586
(Hiatus....)
03 03 2015 Felt pen aerosol. http://www.thingiverse.com/thing:709300
02 03 2015 Bendy Straw, Straight. http://www.thingiverse.com/thing:704015
01 03 2015 Bendy Straw, Straight. http://www.thingiverse.com/thing:704015
28 02 2015 Back Bat Belt clip http://www.thingiverse.com/thing:701633
27 02 2015 Replacement Top for Felt Tip Pen http://www.thingiverse.com/thing:700371
26 02 2015 Bamboo Flute End Cap http://www.thingiverse.com/thing:698775
25 02 2015 Crayola Felt Pen TOP Dummy (Do Not Print) http://www.thingiverse.com/thing:697198
24 02 2015 Crayola Felt Pen Dummy (Do Not Print) http://www.thingiverse.com/thing:697198
23 02 2015 BiteCoin (£1 Coin Removable Trolley Token) http://www.thingiverse.com/thing:696328
22 02 2015 Ø22mm Straight Pipe Coupling http://www.thingiverse.com/thing:693315
21 02 2015 Pipe Extender (ø22mm Solvent Weld) http://www.thingiverse.com/thing:693317
20 02 2015 4-Way Solvent Weld Ø22mm X-Fitting http://www.thingiverse.com/thing:689782
19 02 2015 22mm Plumbing Endcap http://www.thingiverse.com/thing:689117
18 02 2015 A Support to keep a single flower central in Oval Vase http://www.thingiverse.com/thing:687022
17 02 2015 A Support to keep a single flower central in Small Vase http://www.thingiverse.com/thing:685632
16 02 2015 A Small Oval Vase for maybe a daisy? http://www.thingiverse.com/thing:682994
15 02 2015 A Small Vase for maybe a single rose? http://www.thingiverse.com/thing:682992
14 02 2015 Batman Belt Buckle http://www.thingiverse.com/thing:680736
13 02 2015 Nokia Battery holder / wiring http://www.thingiverse.com/thing:680189
12 02 2015 Nokia Battery Secret Micro SD Storage http://www.thingiverse.com/thing:678491
11 02 2015 Hi Vis M8 Push on Jacket (with bare side) for Floor Bolts http://www.thingiverse.com/thing:669582
10 02 2015 Hi Vis M8 Push on Jacket for Floor Bolts http://www.thingiverse.com/thing:669582
09 02 2015 Model of M8 Cap Head http://www.thingiverse.com/thing:670722
08 02 2015 Hi Vis M8 Jacket (with bare side) for Floor Bolts http://www.thingiverse.com/thing:669582
07 02 2015 Hi Vis M8 Jacket for Floor Bolts http://www.thingiverse.com/thing:669582
06 02 2015 Car Panel Clip (2 Versions, 4 parts!) http://www.thingiverse.com/thing:665635
05 02 2015 Accelerometer Housing for GY-61 ADXL335 Accelerometer Analogue Boardhttp://www.thingiverse.com/thing:662505
04 02 2015 GY-61 ADXL335 Accelerometer Analogue Board Model http://www.thingiverse.com/thing:662394
03 02 2015 MicroSD Card Model http://www.thingiverse.com/thing:660235
02 02 2015 SD Card Dummy http://www.thingiverse.com/thing:659681
01 02 2015 Aluminium Section End Caps http://www.thingiverse.com/thing:658715
31 01 2015 Lab Hooks, Ø36mm, for conduit on Aluminium Section Slots, http://www.thingiverse.com/thing:658627
30 01 2015 90° bend for Ø22mm PVC Pipe Weld -Better Support http://www.thingiverse.com/thing:656548
29 01 2015 Ø8mm hook for 80mm aluminium slot section beams. http://www.thingiverse.com/thing:655308
28 01 2015 T-Piece for Ø22mm PVC Pipe Weld http://www.thingiverse.com/thing:639743
27 01 2015 Nokia battery (dummy). http://www.thingiverse.com/thing:652274
26 01 2015 25°(ish) tilt Jar (Ø74mm x 120mm) Rack for Seperation and Settling http://www.thingiverse.com/thing:651609
25 01 2015 90° bend Ø22mm ABS to PVC pipe for welding- shorter bend innovative 45° printhttp://www.thingiverse.com/thing:650329
24 01 2015 Nescafe Nesspresso Milk Frother (NSFW). http://www.thingiverse.com/thing:649314
23 01 2015 FUHR 46012 Patio Door Spacer (obsoleted manufactured part) http://www.thingiverse.com/thing:647646
22 01 2015 Limit Switch Mount for 20mm Aluminium Slot Section http://www.thingiverse.com/thing:646292
21 01 2015 Ø16 Lab Hook for 80mm Aluminium Slot Section http://www.thingiverse.com/thing:642899
20 01 2015 Ø12 Lab Hook for 80mm Aluminium Slot Section http://www.thingiverse.com/thing:642899
19 01 2015 Washer holder tool - quite specific! http://www.thingiverse.com/thing:641708
18 01 2015 90° deg Elbow for low pressure ø22mm pipe grey water system http://www.thingiverse.com/thing:639743
17 01 2015 Aluminium Section Hook Retainer (I don't like this one!) http://www.thingiverse.com/thing:637773
16 01 2015 Aluminium Section Hook (Variants to come....) http://www.thingiverse.com/thing:637773
15 01 2015 Coffee Pod (Please don't print!) http://www.thingiverse.com/thing:634973
14 01 2015 Curtain Rail Support http://www.thingiverse.com/thing:634419
13 01 2015 Rainy Day Coin Token http://www.thingiverse.com/thing:632932
12 01 2015 MiniFig Ukulele http://www.thingiverse.com/thing:631264
11 01 2015 Toyota Engine Seal Fix http://www.thingiverse.com/thing:629300
10 01 2015 Sink Strainer Fix http://www.thingiverse.com/thing:625879
09 01 2015 Rivet Style Foot Backpiece http://www.thingiverse.com/thing:626931
08 01 2015 Rivet Style Foot http://www.thingiverse.com/thing:626931
07 01 2015 Taller Toilet Flush Button http://www.thingiverse.com/thing:593344
06 01 2015 45°Square XSec 45mm jar rack for settling http://www.thingiverse.com/thing:623002
05 01 2015 45°ø45mm jar rack for settling http://www.thingiverse.com/thing:621728
04 01 2015 CONNECTOR for Train Track http://www.thingiverse.com/thing:319273
03 01 2015 Female Female Short Train Track http://www.thingiverse.com/thing:319273
02 01 2015 Female Female Train Track http://www.thingiverse.com/thing:319273
01 01 2015 Male Male Train Track http://www.thingiverse.com/thing:319273

Bath Robotic

EUR ING Andy Southern

Titles and post-noms aside, this is a learning curve for me. I hope you enjoy browsing the items I've drawn and designed so far.

Learning is to be actively pursued by everyone on the planet. Imagine how much better the world would be if we banned watching the Cardassians and made people go and learn how stuff works and how to address needs? How little does your time mean to you that you will watch 15 minutes of adverts per hour just to watch what contrived situation Kim and Kenye get up to? Is your life better at the end of that hour?

Or are you left thinking "Why do they have all that crap they don't need and people can't even find clean water to drink in the developing world?"

Learn a new skill, and help make our planet better. It might not be 3D printing or design, it may never pan out to be something people need. But its better than sitting down and watching Nicole and Paris or Dougie Houser meeting his mother or whatever it is for the moment. (Rant over).

I Am A…

Engineer, Designer, Professional

Tools I Use…

Printers: RepRap Mendel Clone HanBot

Design Programs: Creo, Proe, Creo Elements Direct Modelling

3D Design Skill Level

Intermediate

Groups

You can find bathrobotics participating in these groups

Engineering 722 11.6K
Arduino 112 6,634
RepRap 228 3,582
Robots 17 3,026
Blender 3D 60 2,512
View More
View Fewer

Favorites

A snapshot of bathrobotics's favorite designs, collections and makes

Toyota Engine Compartment Seal Clip by bathrobotics Jan 10, 2015
4-Way X Pipe Fitting (Ø22mm Pipe Solvent Weld) print in ABS and Vapour Bath by bathrobotics Feb 19, 2015
Car Panel Clip by bathrobotics Feb 5, 2015
45° Spice Rack for Ø45mm Jar Settling by bathrobotics Jan 4, 2015
Curtain Rail Supports. by bathrobotics Jan 13, 2015
Batman Belt Buckle for kids Fancy Dress by bathrobotics Feb 13, 2015
Top