Using the 2" wide blue painters tape and glue stick (came off real easy...maybe too easy)
Given: Filament type: ABS (Black) by Hatchbox 1.75 mm
Model: 10 mm x 10 mm x 40 mm tall.
Slicer: Cura
Layer Height: .2
Shell Thickness: .8
Enable retraction: 1.5
Bottom/Top thickness: .8
Fill Density: 10 percent
Print Speed: 80 mm/s
Printing temperature: 240
Bed temperature: 100
Support type: None
Platform adhesion type: Brim
Filament diameter: 1.75mm
Flow (%): 100.0
Nozzle size: 0.4
Time: 11 minutes
0.27 meter, 1 gram
Is there a way of posting images of it here? Edges sharp, no artifacts, Popped right off of masking tape, maybe a little too easy.
Using the 2" wide blue painters tape and glue stick (came off real easy...maybe too easy)
Given: Filament type: ABS (Black) by Hatchbox 1.75 mm
Model: 10 mm x 10 mm x 40 mm tall.
Slicer: Cura
Layer Height: .2
Shell Thickness: .8
Enable retraction: 1.5
Bottom/Top thickness: .8
Fill Density: 10 percent
Print Speed: 80 mm/s
Printing temperature: 240
Bed temperature: 100
Support type: None
Platform adhesion type: Brim
Filament diameter: 1.75mm
Flow (%): 100.0
Nozzle size: 0.4
Time: 11 minutes
0.27 meter, 1 gram
Is there a way of posting images of it here? Edges sharp, no artifacts, Popped right off of masking tape, maybe a little too easy.