Here are the settings Maker Muse is using on Simplify3D Slicer for Qidi Tech X-One which he considers as dialed in for PLA.
Process Name Q_1.5mm_white
Select Profile: QIDI-TECH X-ONE (Modified)
Auto-Configure for Material: PLA
Auto-Configure for Print Quality: DEFAULT FAST
Infill Percentage: 20%
Infill Raft: Unchecked
Generate Support: Unchecked
Extruder Tab
Extruder 1 Toolhead
Overview
Extruder Toolhead Index: Tool D
Nozzle Diameter: 0.40
Extrusion Multiplier: 0.90
Extrusion Widtch: Auto
Ooze Control
Retraction: Checked
Retraction Distance: 0.80mm
Extra Restart Distance: 0.00mm
Retraction Vertical Lift: 0.00mm
Retraction Speed: 60.00mm/s
Coast at End: Unchecked
Wipe Nozzle: Unchecked
LAYER TAB
Primary Extruder: Extruder 1
Primary Layer Height: 0.2500 mm
Top Solid Layers: 3
Bottom Solid Layers: 3
Outline/Perimeter Shell: 3
Outline Direction: Inside-Out
Print islands sequentially without optimization: Unchecked
Single outline corkscrew printing mode (vase mode): Unchecked
First Layer Settings
First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 50%
Start Points
Optimize start points for fastest printing speed
ADDITIONS TAB
Use Skirt/Brim: Checked
Skirt Extruder: Extruder 1
Skirt Layers: 1
Skirt Offset from Part: .50 mm
Skirt Outlines: 2
Use Raft: Unchecked
Use Prime Pillar: Unchecked
Use Core Shield: Unchecked
INFILL TAB
General
Infill Extruder: Extruder 1
Internal Fill Pattern: Rectilinear
External Fill Pattern: Rectilinear
Internal Fill Percentage: 20%
Outline Overlap: 15%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00mm
Print Sparse Infill Every: 1 layer
Include solid diaphragm every: Unchecked
Infill Angle Offsets: 0
Add Angle: 45
-45
Print every infill angle on each layer: Unchecked
Here are the settings Maker Muse is using on Simplify3D Slicer for Qidi Tech X-One which he considers as dialed in for PLA.
Process Name Q_1.5mm_white
Select Profile: QIDI-TECH X-ONE (Modified)
Auto-Configure for Material: PLA
Auto-Configure for Print Quality: DEFAULT FAST
Infill Percentage: 20%
Infill Raft: Unchecked
Generate Support: Unchecked
Extruder Tab
Extruder 1 Toolhead
Overview
Extruder Toolhead Index: Tool D
Nozzle Diameter: 0.40
Extrusion Multiplier: 0.90
Extrusion Widtch: Auto
Ooze Control
Retraction: Checked
Retraction Distance: 0.80mm
Extra Restart Distance: 0.00mm
Retraction Vertical Lift: 0.00mm
Retraction Speed: 60.00mm/s
Coast at End: Unchecked
Wipe Nozzle: Unchecked
LAYER TAB
Primary Extruder: Extruder 1
Primary Layer Height: 0.2500 mm
Top Solid Layers: 3
Bottom Solid Layers: 3
Outline/Perimeter Shell: 3
Outline Direction: Inside-Out
Print islands sequentially without optimization: Unchecked
Single outline corkscrew printing mode (vase mode): Unchecked
First Layer Settings
First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 50%
Start Points
Optimize start points for fastest printing speed
ADDITIONS TAB
Use Skirt/Brim: Checked
Skirt Extruder: Extruder 1
Skirt Layers: 1
Skirt Offset from Part: .50 mm
Skirt Outlines: 2
Use Raft: Unchecked
Use Prime Pillar: Unchecked
Use Core Shield: Unchecked
INFILL TAB
General
Infill Extruder: Extruder 1
Internal Fill Pattern: Rectilinear
External Fill Pattern: Rectilinear
Internal Fill Percentage: 20%
Outline Overlap: 15%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00mm
Print Sparse Infill Every: 1 layer
Include solid diaphragm every: Unchecked
Infill Angle Offsets: 0
Add Angle: 45
-45
Print every infill angle on each layer: Unchecked