You are reporting QIDI TECH X-ONE FILAMENT SETTINGS as a violation of the Thingiverse Terms of Service.
I have read the Thingiverse Terms of service and I understand that falsely reporting violations can result in a ban from Thingiverse.
Thank you for taking the time to bring this matter to You are reporting QIDI TECH X-ONE FILAMENT SETTINGS as a violation of the Thingiverse Terms of Service. Thank you for taking the time to bring this matter to our attention. To help our team best respond to this issue please take a few moments to describe what brought this matter to your attention.
Given: Filament type: PETG+ (Clear transparent) by T-Glase Taulman 1.75 mm. Model: TempTower_v2 Slicer: Qidi-Tech (Cura Adaptation) Layer Height: .15 Shell Thickness: 1.2 Enable Retraction: Yes Minimum travel (mm) 5 Enable combing: ALL Minimum extrusion before retracting (mm): 0.02 Z Hop when retracting (mm): 0.0 Skirt: 1 Start distance: 3.0 Minimal length (mm): 150 Cool: Fan full on at height (mm): 0.5 Fan speed min (%): 100 Fan speed max (%): 100 Minimum speed (mm/s): 10 Cool head lift: unchecked Infill: Solid infill top: Checked Solid infill bottom: Checked Infill overlap (%): 15 Infill prints after perimeters: Unchecked Support: Structure type: Lines Overhang angle for support (deg) 60 Fill amount (%) : 15 Distance X/Y (mm) 0.7 Distance Z (mm): 0.15
Black Magic: Spiralize the outer contour: Unchecked Only follow mesh surface: Unchecked
Brim: Brim line amount: 20
Raft: Extra margin (mm): 5.0 Line spacing (mm): 3.0 Base thickness (mm): 0.3 Base line width (mm): 1.0 Interface thickness (mm): 0.27 Interface line width (mm): 0.4 Airgap: 0.0 First layer Airgap: 0.22 Surface layers: 2 Surface layer thickness (mm): 0.27 Surface layer line width (mm): 0.4
Fix horrible: Combine everything (Type-A): Checked Combine everything (Type-B): Unchecked Keep open faces: Unchecked Extensive stitching: Unchecked Bottom/Top Thickness: 1.2 Fill Density: 20% Print Speed: 13mm/s Print Temperature: 240 degrees C. Bed Temperature: 70 degrees C. Support type: None Platform Adhesion type: None Filament: 1.75 Flow Percentage: 100% Nozzle Size: 0.4
Given: Filament type: PETG+ (Clear transparent) by T-Glase Taulman 1.75 mm.
Model: TempTower_v2
Slicer: Qidi-Tech (Cura Adaptation)
Layer Height: .15
Shell Thickness: 1.2
Enable Retraction: Yes
Minimum travel (mm) 5
Enable combing: ALL
Minimum extrusion before retracting (mm): 0.02
Z Hop when retracting (mm): 0.0
Skirt: 1
Start distance: 3.0
Minimal length (mm): 150
Cool:
Fan full on at height (mm): 0.5
Fan speed min (%): 100
Fan speed max (%): 100
Minimum speed (mm/s): 10
Cool head lift: unchecked
Infill:
Solid infill top: Checked
Solid infill bottom: Checked
Infill overlap (%): 15
Infill prints after perimeters: Unchecked
Support:
Structure type: Lines
Overhang angle for support (deg) 60
Fill amount (%) : 15
Distance X/Y (mm) 0.7
Distance Z (mm): 0.15
Black Magic:
Spiralize the outer contour: Unchecked
Only follow mesh surface: Unchecked
Brim:
Brim line amount: 20
Raft:
Extra margin (mm): 5.0
Line spacing (mm): 3.0
Base thickness (mm): 0.3
Base line width (mm): 1.0
Interface thickness (mm): 0.27
Interface line width (mm): 0.4
Airgap: 0.0
First layer Airgap: 0.22
Surface layers: 2
Surface layer thickness (mm): 0.27
Surface layer line width (mm): 0.4
Fix horrible:
Combine everything (Type-A): Checked
Combine everything (Type-B): Unchecked
Keep open faces: Unchecked
Extensive stitching: Unchecked
Bottom/Top Thickness: 1.2
Fill Density: 20%
Print Speed: 13mm/s
Print Temperature: 240 degrees C.
Bed Temperature: 70 degrees C.
Support type: None
Platform Adhesion type: None
Filament: 1.75
Flow Percentage: 100%
Nozzle Size: 0.4