Report as Inappropriate

You are reporting a comment on Fully assembled 3D printable wrench as a violation of the Thingiverse Terms of Service. Thank you for taking the time to bring this matter to our attention. To help our team best respond to this issue please take a few moments to describe what brought this matter to your attention.

I am having a major issue printing this in ABS at 0.2 mm with Simplify3D as my slicer. I cannot seem to get the middle floating portion (the moving jaw part in the slot) to stay in place. I am trying to print this with the regular gap, and even then it seems that the gap is too large (2-3 layers in size at 0.2 mm). I have tried varying bed temp from 105 C to 80 C, and extrusion temp from 235 C to 212C. Also changed extrusion multiplier from 1.00 to 1.10. Nothing seems to do the trick to get that middle printed portion to stay in place. I have failed 7 times now... Not sure what else to do.

Using a well tuned Qidi Tech replicator clone.