Loading

Report as inappropriate

Here is the ending gcode...

M104 T0 S170 ; lower temp to 170
G28 ; home all axes
G91 ; set to relative move mode
G1 Z-15 F10; move down 15mm slowly
G91 ; set to relative move mode
G1 Z10 F10;
G91 ; set to relative move mode
G1 Z-10 F10;
G91 ; set to relative move mode
G1 Z10 F10; move up 10mm slowly...
G91 ; set to relative move mode
G1 Z-10 F10;
G91 ; set to relative move mode
G1 Z10 F10;
G91 ; set to relative move mode
G1 Z-10 F10;
G91 ; set to relative move mode
G1 Z10 F10;
G91 ; set to relative move mode
G1 Z-10 F10;
G91 ; set to relative move mode
G1 Z10 F10;
G91 ; set to relative move mode
G1 Z-10 F10;
G91 ; set to relative move mode
G1 Z10 F10;
T0 ; select extruder 0
G1 E-50 F1000 ; retract 50mm
G91 ; set to relative move mode
T1 ; select extruder 1
G1 E-50 F1000 ; retract 50mm
G91 ; set to relative move mode
T2 ; select extruder 2
G1 E-50 F1000 ;retract 50mm
M104 T0 S0 ; shut off hot end
G90 ; back to absolute move mode
G28 ; go home