Report as inappropriate

I printed this on a UP mini 2 - lets see - I had to reduce the size to .8 for all parts - I printed with 65% infill , .3mm , raft and no support on parts 1,2,9,10,11,12 ( but 11 and 12 had to be rotated to fit on the build plate ) - all the parts with overhang kinda worked but i used a slurry to repair and connect the parts. - it is still printing parts as I write this - each part is taking about 2 - 3 hours to print. I am also printing on kap tape with a slurry mix thinly applied. -