Loading

Report as inappropriate

Several chunks of copypasta (formatting is mangled) with source URL's listed, describing the technical aspects of the original i3mega:


http://www.purchasingmachine.com/office-products/3d-printer/anycubic-integrated-3d-printer-main-board-compatible-mega2560-ramps1-4-combo-4-layers-pcb-controller-board-for-reprap-delta-kossel-mendel-prusa-i3/


Anycubic Integrated 3D Printer Main Board Compatible Mega2560 & RAMPS1.4 Combo 4 Layers PCB Controller Board for RepRap Delta Kossel Mendel Prusa I3

Product Features

Integrated with the multi-function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable.
Firmware can use the same configuration as ramps 1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can run in TriGorilla board directly
Adopt ATmega2560 as the main control chip, coupled with the high performance USB serial converter CP2102. Support LCD2004 and LCD12864 without using adapter
Support up to 5 motor drivers, support A4988/ DRV8825 /TMC2100 driver: Motor drive circuit doesn't integrate on the circuit board, so you can change any stepper motor driver when you need, easier to operate.
TriGorilla had reserved SERVO, UART, IIC expansion, so you can control touch screen smart controller, control wireless module and the detection of break, etc

Product Description

Product Description:

TriGorilla is a main board developed by Anycubic R&D team that integrated with the multi- function of the Mega 2560+ramps 1.4 on respect of both software and hardware and has more premium features; the streamlined interfaces avoid the unnecessary troubles effectively and power than Ramps 1.4 + Mega2560, it is a feature rich all-in-one electronics solution for Reprap Mendel Prusa and other CNC devices

TriGorilla adopts DC-DC step-down scheme design and Recoverable fuse for short-circuit protection, improving the MEGA2560 board serious heating problem. Allowing any power supply from 10V-30V

Specifications:

Main Control Chip: ATMEGA256016AU

Input Power: 10V ~ 30V

Standby Current: 35mA±5mA

Stepper Motor Drivers: 5 channel Max

Hot bed Output Control: 1 channel

Heated output control: 2 channel

Under-current output control: 3 channel

Dimensions: 125mm x 82mm

Package List:
1* TriGorilla main board


https://www.aliexpress.com/item/3D-Printer-ANYCUBIC-TriGorilla-Integrated-Main-board-Compatible-Mega2560-RAMPS1-4-Combo-Control-Board-4-Layers/32758526972.html

3D Printer ANYCUBIC TriGorilla Integrated Main board Compatible Mega2560 & RAMPS1.4 Combo Control Board 4 Layers PCB Controller Board for RepRap Mendel <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=tv-printerlink-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl">  Prusa</a> I3

TriGorilla is a integrated main board that is integrated with the mighty function of the Mega2560+ramps 1.4 on respect of both software and hardware and has more premium features; the streamlined interfaces effectively avoid the unnecessary troubles and power than Ramps 1.4 + Mega2560, it is a feature rich all-in-one electronics solution for Reprap Mendel Prusa and other CNC devices.

Main Control Chip: ATMEGA256016AU

Input Power: 10V ~ 30V

Standby Current: 35mA±5mA

Stepper Motor Drivers: 5 channel Max

Hot bed Output Control: 1 channel

Heated output control: 2 channel

under-current output control: 3 channel

Dimensions: 125mm x 82mm

Feature:
1, simple to install:
Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable.
2, Convenient to use:
TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply, you can choose DC power supply connection or directly from the terminal, it is convenient to use. TriGorilla use CP2102 chip as a serial port communication, communication not only stable, but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board, so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.)
3, Excellent compatibility:
Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly running in TriGorilla board.
4, voltage input at super wide range, short-circuit protection:
TriGorilla adopts DC - DC step-down scheme design and Recoverable fuse for short-circuit protection, improving the MEGA2560 board serious heating problem, Allowing any power supply from 10V-30V.
5, Support up to 5 motor drivers, support A4988/ DRV8825 /TMC2100 driver:
Motor drive circuit doesn't integration on the circuit board. You can change any stepper motor driver you need, easier to operate. (Support A4988/ DRV8825 /TMC2100 driver)
6, Rich expansion port
TriGorilla had reserved SERVO, UART, IIC expansion, so you can use it realize automatic leveling, control touch screen smart controller, control wireless module and the detection of break, etc
7, wide applicability(widely used in 3D printers, e.g. Kossel, Prusa i3, corexy, etc

Package included:
1 x ANYCUBIC TriGorilla 3D printer control board
1 x 30cm USB cable


http://buyreview.info/trigorilla

Trigorilla Review
Trigorilla see our review to help you get the perfect products you would like. You can read detail information about this product below.

Trigorilla features comparison at this site help visitor to find best Trigorilla product at amazon by provides Trigorilla product features list, visitor can compares many Trigorilla product, simple click at read more button to find detail about Trigorilla features, description, costumer review, price and real time discount at amazon, below we provides Trigorilla features comparison tables.

Trigorilla Review Features Comparison

Product List Preview
TriGorilla 3D Printer Heating Controller MKS MOSFET for Heatbed Extruder MOS Module
Brand: TriGorilla

Each one will be done functional test
Superior performance of MOSFET (Max 280A)
Extra large heat sink , the maximum current can be up to 30A or more
Can use hot bed output signal of Ramp1.4 and MKS series to control
Can use digital signal of 5-24v to control

TriGorilla 3D Printer Heating Controller MKS MOSFET for Heatbed Extruder MOS Module

See It
XCSOURCE TriGorilla 3D Printer Motherboard Newest Controller Board Using ATMEGA2560-16U Chip for Replacing RAMPS1.4+Mega 2560 Kit for Kossel, Prusa i3 TE627
Brand: XCSOURCE

Integrated with the mighty function of the RAMPS1.4+Mega 2560 kit. Upgraded replacement for the old motherboards. With a compact size to save space and reduce the wiring caused problem.
TriGorilla motherboard supports LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply.
Can use the same configuration firmware as ramps1.4, the marlin firmware which runs in RAMPS1.4+Mega 2560 kits can also run in TriGorilla board.
DC 12V-35V wide range of voltage input, with short-circuit protection. With 5 motor driver slots, supports A4988 / DRV8825 / TMC2100 drivers.
Can widely be used on most 3D printers, e.g. Kossel, <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=tv-printerlink-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl">  Prusa</a> i3, etc.

XCSOURCE TriGorilla 3D Printer Motherboard Newest Controller Board Using ATMEGA2560-16U Chip for Replacing RAMPS1.4+Mega 2560 Kit for Kossel, Prusa i3 TE627

See It
TriGorilla MK2A 300x200x3mm Aluminum Heatbed Hotbed Hot Plate for 3D Printer Prusa Mendel
Brand: TriGorilla

This heated bed made of thicker 3mm, which gives it additional strength necessary for bigger size PCB. Product can be used to upgrade your existing <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=tv-printerlink-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl">  Prusa</a> i3 3D printer to a larger 300 x 200 mm print area
The core is regular 1.6mm and the print surface is the same as regular heatbeds but with a metric ruler grid
The distance between mounting holes are 209mm and 309mm
Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted

TriGorilla MK2A 300x200x3mm Aluminum Heatbed Hotbed Hot Plate for 3D Printer Prusa Mendel

See It
TriGorilla Transparent 1.75mm PLA 3D Printer Filament 1KG Spool
Brand: TriGorilla

1.75mm Transparent PLA (Polylactic Acid) filament
Specifically designed for most 3D Printer and 3D Pen in the market ,such as RepRap, Makerbot, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC and ect
Vacuum sealed packaging guarantees you to experience the best perfomance by isolating moisturized enviroment to the filament
The PLA filament are capable to extrude smoothly that help to build a more delicate object
Backed by 100% satisfaction guarantee

TriGorilla Transparent 1.75mm PLA 3D Printer Filament 1KG Spool

See It
TriGorilla MKS BASE V1.0 3D Printer Control Motherboard Compatible RepRap Ramps1.4 With USB Cable
Brand: TriGorilla

It gather all function on one board, which solved the Ramps1.4 combination interface problem, which easily out of order
Using 4982 as a motor drive, the SOP package, the effect of heat dispelling is better
Circuit board uses the high quality of 4 layer board,optimize heat dissipation;Ramp Is 2 layer board
Using special power supply chip, support the 12v-24v power input, solve the problem of Ramps voltage conversion of chip fever

TriGorilla MKS BASE V1.0 3D Printer Control Motherboard Compatible RepRap Ramps1.4 With USB Cable

See It
TriGorilla 3D Printer Glow in Dark PLA Filament 1.75mm 1KG Spool
Brand: TriGorilla

1.75mm Glow in Dark PLA (Polylactic Acid) filament
Specifically designed for most 3D Printer and 3D Pen in the market ,such as RepRap, Makerbot, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC and ect
Vacuum sealed packaging guarantees you to experience the best perfomance by isolating moisturized enviroment to the filament
The PLA filament are capable to extrude smoothly that help to build a more delicate object
Backed by 100% satisfaction guarantee

TriGorilla 3D Printer Glow in Dark PLA Filament 1.75mm 1KG Spool

See It
TriGorilla LJ12A3-4-Z/BX Inductive Proximity Sensor Switch NPN DC6-36V 3D Printer Bed Self Adjustment
Brand: TriGorilla

This Proximity sensor is very useful and inexpensive solution for automated heatbed level adjustment
It detects metal objects (aluminum print surface)within 4mm distance

TriGorilla LJ12A3-4-Z/BX Inductive Proximity Sensor Switch NPN DC6-36V 3D Printer Bed Self Adjustment

See It
TriGorilla 3D Printer Prusa I3 Movement Kit GT2 Belt 20T Timing Pulley 608zz and 624zz Bearing LM8uu Linear Bearing Motor Shaft Coupler for Reprap
Brand: 3DTOP

GT2 Timing Belt System designed for linear motion and precision,6mm Wide, Stretch Resistant Fiberglass Reinforced Neoprene Rubber GT2 Timing Belt
High Quality Aluminum Pulleys for 5mm diameter shafts
608ZZ and 624ZZ dimensions suitable for use in such applications as skateboards, inline skates, and scooters
LM8UU Great for linear motion on 3D Printer, CNC, and other applications
The motor shaft coupler provides an extremely tight grip

TriGorilla 3D Printer Prusa I3 Movement Kit GT2 Belt 20T Timing Pulley 608zz and 624zz Bearing LM8uu Linear Bearing Motor Shaft Coupler for Reprap

See It
TriGorilla Golden 1.75mm PLA 3D Printer Filament 1KG Spool
Brand: TriGorilla

1.75mm Golden PLA (Polylactic Acid) filament
Specifically designed for most 3D Printer and 3D Pen in the market ,such as RepRap, Makerbot, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC and ect
Vacuum sealed packaging guarantees you to experience the best perfomance by isolating moisturized enviroment to the filament
The PLA filament are capable to extrude smoothly that help to build a more delicate object
Backed by 100% satisfaction guarantee

TriGorilla Golden 1.75mm PLA 3D Printer Filament 1KG Spool

See It
OSOYOO MKS Base V1.5 3D Printer Controller remix Board ( Combination of Arduino MEGA2560 + RAMPS1.4 + 5PCS A4982 drivers) With USB Cable
Brand: OSOYOO

Marlin firmware installation guide link: http://www.osoyoo.com/?p=1399. Connection graph guide link: http://osoyoo.com/2016/07/03/reprap-mks-1-4-3d-printer-connection-graph/.
This MKS BASS V1.5 board is with simple interface as it is the combination of Arduino MEGA2560 + RAMPS1.4 + 5 x A4982 drivers. This MKS BASS V1.5 board with Arduino MEGA compatible Atmega2560 and FT232 processors can be compatible with all RAMPS class firmware
4 layers PCB design of MKS BASS V1.5 board optimize heat dissipation. A4982 drivers is SOP on MKS BASS V1.5 board, and it is better heat dissipation than A4988 driver
Suitable for dual-Extrude printer, support 3 fans. 3x temperature ADC connectors for thermistors, 4x PWM capable power mosfet outputs with voltage selector for MainPower.(Bed, Extruder0, Extruder1, Fans). 6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
This MKS BASS V1.5 board can be recoverable fuse for short-circuit protection.

OSOYOO MKS Base V1.5 3D Printer Controller remix Board ( Combination of Arduino MEGA2560 + RAMPS1.4 + 5PCS A4982 drivers) With USB Cable

See It

People says about Trigorilla Comparison
It's just perfect! Everything works. It came about one day after it said it would come but, it was worth the wait! If you're looking for something small to take to school or on vacation, then this is great. What's also great is that is very light so you can probably put Trigorilla in a purse.


COPIED FROM AMAZON LISTING

Product features

Large build volume: 210 x 210 x 205mm and user friendly 3.5-inch TFT touch screen
Rigid metal frame and superior stability, can be assembled in under just 2 minutes! Faster and more accurate printing within mere microns
Filament detection: Automatic printing pause when filament runs out, resume after filament re-load with just one click
Proximity sensor leveling support. Combined with the advantage of manual and auto leveling
Auto resume when printing in case of a power failure

Product description

Quality Guarantee:

Professional tech support and customer service. Feel free to make contact! We are here to answer to any customer needs. Satisfaction guaranteed!

Certifications:

All Anycubic i3 Mega 3D Printers have been Certificated by CE, FCC, RoHS and EN

Technical Specifications:

Printing Technology: FDM (Fused Deposition Modeling)

Layer Resolution: 0.05-0.3 mm

Positioning Accuracy: X/Y 0.01mm Z 0.002mm

Print Speed: 20~100mm/s (Recommended Speed 60% )

Travel Speed: 150mm/s

Nozzle Diameter: 0.4 mm

Extruder Quantity: 1

Support Print Materials: PLA, ABS, HIPS, WOOD

Build Dimensions : 210 x 210 x 205mm

Here is the video for your reference: https://youtu.be/zwKTwh0XlPk

Here is the manual in pdf:https: //drive.google.com/open?id=0B8VIB533cgdMaTdLQVU4SG8wd2M

Temperature:

Operational Print Bed Temperature: 100ºC Max

Operational Extruder Temperature: 275ºC

Ambient Operating Temperature: 8ºC - 40ºC

Software:

Input Formats: .STL, OBJ, .DAE, .AMF

Slicer Software: Cura

Cura Output Formats: G-Code

Connectivity: SD Card & USB support

Electrical:

Input Rating: 100-240V AC, 50/60Hz, 1.5A Physical Dimensions:

Printer Dimensions: 405 x 410 x 453mm

Package Weight: 15kg

Package List:

1x I3 Mega

1x 8G SD Card

1x User Guide

1x Backup Hotend Set

1x Test filament ( Random Color )

1x Spool Holder

1x Tool Set


COPIED FROM 3DPRINTERKART.COM SITE LISTING

Quick Information:
Brand Name: Anycubic
No. of Extruders : Single
Filament Diameter : 1.75mm
Heated Bed: Yes
Nozzle Diameter : 0.4 mm
Print speed : 20 - 100mm/s
Delivery Period : 7 to 10 working days Model Name/No : i3 Mega
Print Size (XYZ) :210x210x205mm
Layer Resolution : 0.05 - 0.3mm
Filament compatibility :PLA,ABS,HIPS,Wood etc
Software : Cura & Other Open Source
Positioning accuracy : X 0.01mmY 0.01mm Z 0.002mm

Note: Ships from china, Prices are excluding local custom duties & taxes. You can calculate here

Key Features:

  • Exclusive Trigorilla Mainboard Supports All features

  • Features like power resume, smart levelling , Filament run out detection

  • 3.2" TFT Touchscreen , Flash assembly , Faster print rate.

  • Plug Type EU OR AU Optional

  • This printer's mainboard is exclusively designed by Anycubic called " Trigorilla mainboard" to support all features like Power resume, Smart * levelling , Filament run out detection .

  • Filament run out detection feature automatically pause the printer when filament runs out, user can change filament and on one click print resume from same position.

  • This printer is upgraded to large build volume compared to other printer in this price & feature range.It supports all latest filaments in market.

  • The Body is metal Build, superior stability improving printing accuracy. It hardly takes some minutes to flash assemble the printer with 8 screws. Its Touchscreen display supports multi language custom friendly userinterface runs smoothly.

  • Specially designed printing head and platform made of light weight aluminium alloy and dual fan helps for fast and accurate printing.
  • See more at: https://www.3dprinterkart.com/Products/details/Anycubic%20i3%20Mega%20Large%20Desktop%203D%20Printer%20Trigorilla%20Mainboard%20Print%20Area%20210X210X205/MzM2/USD#sthash.FNIoYXUi.dpuf