Loading

Report as inappropriate

If you search for M301 and M303 you come to this section. These are in brackets 【 】where as other commands are not and it says "if to enable this function, place a tick in front of the command". For me the tick symbol is `. I am wondering if the 32-bit board has some compatibility mode that requires a tick in front to parse it correctly.

;【M301 P22.2 I1.08 D114 】
;PID parameter setup of temperature, if you are not an expert, and your current temperature control is
;comparatively stable, you need not set the parameter。if to enable this function, place a tick in front of the command.
;M301 P22.2 I1.08 D114
; ==================================
;【M303 E0 S150 C5】if to enable this function, place a tick in front of the command.
;Automatic modulation PID command, this command will be blocked for a long time
;temperature 150°, automatic cycle vibrates 4 times, the PID parameter after automatic modulation can see through repetier-host
;M303 E0 S150 C5