Report as inappropriate

I agree with the other comments.

  • Microswiss instructions say to reduce retraction distance. I only retract [email protected]/s with my Microswiss.
  • Upgrade your cooling fan. The stock cooling fan does not provide sufficient part cooling. There are many choices out there. I use this one: https://www.thingiverse.com/thing:2004629
  • Slow down print speed to 10-15mm/s for layers below 10s. This allows layers more time to cool.

With those simple changes, you should see dramatic improvements.

CiiiCooler for Wanhao Duplicator i3 / Maker Select