Loading

Report as inappropriate

Thanks for your reply. What about the below values? I ran many attempts and I don't have enough PLA roll for many failed prints. That's why I wanna get it right this time.

Below are my settings. If you are kind enough please suggest better ones:

Extrusion multiplier: 1.1
Bed temp: 50ºC
Disable fan for the first 3 layers
Retraction length: 1mm
Retraction speed: 80mm/s
Layer height: 0.05mm
First layer height: 130%

Fill pattern: Rectilinear
Fill density: 100%
Combine infill: every 1 layer
Infill Extrusion Width: 180%

Looking forward for your reply