Loading

Report as inappropriate

Good day!
Q: I have Ender 3 at the beginning of printing draws a line on the left side of the platform, it is in the slicer settings (not found. I Use Cura 3.5.1)?
Because in the generated G-code it is present:
a piece of code from the head of the file:

G1 Z5.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z5.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed