Loading

Report as inappropriate

what is problem?

%Run Husky.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\Husky.txt", line 1
; generated by Slic3r 1.2.9 on 2017-08-28 at 17:46:06
^
SyntaxError: invalid syntax
%Run g_code_file_2.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\g_code_file_2.txt", line 2
G0 F5400 X67.469 Y94.409 Z0.300
^
SyntaxError: invalid syntax
%Run g_code_file_2.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\g_code_file_2.txt", line 2
G1 F2400 X96.969 Y94.409 E1.83970
^
SyntaxError: invalid syntax
%Run g_code_file_2.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\g_code_file_2.txt", line 2
G1 F2400 X96.969 Y94.409 E1.83970
^
SyntaxError: invalid syntax
%Run g_code_file_2.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\g_code_file_2.txt", line 1
G1 F2400 X96.969 Y94.409 E1.83970
^
SyntaxError: invalid syntax
%Run g_code_file_2.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\g_code_file_2.txt", line 1
Generated with Cura_SteamEngine 15.01
^
SyntaxError: invalid syntax
%Run Husky.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\Husky.txt", line 3
; external perimeters extrusion width = 1.50mm
^
SyntaxError: invalid syntax
%Run Husky.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\Husky.txt", line 4
G28 ; home all axes
^
SyntaxError: invalid syntax
%Run Husky.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\Husky.txt", line 2
G1 Z1.500 F1200.000
^
SyntaxError: invalid syntax
%Run Husky.txt
Traceback (most recent call last):
File "C:\Users\taner\Desktop\MPSCARA_Mostly_Printed_SCARA_Robot\files\V1.2_Software\Test Files\Husky.txt", line 2
G1 X54.705 Y56.216 E0.68368 F600.000
^
SyntaxError: invalid syntax